OK first you have the deck mounted in the wrong holes at the rear. The pin goes in the rear holes. That is going to move the deck forward. Yeah I know the belt is already too long and this is going to make that even worse. Next you have an early Haban and I'm guessing that the pulley on the deck is the small one. You are going to need to measure the diameter of both the center deck pulley and the PTO. One we get it set up as it should be then we can worry about the belt.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|