1450 hydro getting hot and pressure in the rearend
I noticed the rearend on my 1450 was very hot after mowing for a couple hours the other day and there were little bubbles of hy-tran around the gasket. The rear cover was probably over 200 deg.
I did some checking today and it's the hydro that is actually getting hot. I checked the level of hy-tran and it was right up to the fill hole, but there was some pressure in the diff. when I took the plug out. The hydro is nice and clean with no debris sitting on to of it, I changed the hy-tran and filter last fall and I have a new fan. It never sits outside overnight or gets more than a few sprinkles of rain on it, so I'm sure there is not a water problem.
Any suggestions?
Thanks,
Geoffrey
__________________
2 Originals, 100, 105, 125, 1450, 1200, 2 IH 982's, 1211, 1872, 2072, 2-1864's, 1782, a few 42" front blades, 2 Haban 54" blades, Haban sickle mower, BB36, QA-36A, 42" IH rear blade, 42" IH landscape rake, #1 tiller, #40 box blade, 59M shredder, #2 cart, International 3312 push mower, International 250 power washer, 1952 IH refridgerator, 1971 IH 1210 3/4T 4x4 truck
  
|