That setup has an internal brake system that uses a puck against a flat surface attached to the rotating assembly in the transmission. Those are pretty easy to replace or repair. More than likely it just needs adjusted. Secondly, when the brake pedal on a hydro is depressed it will cause the hydro handle to return to neutral. Brakes are rarely used on hydros, but as you say, if parking on a hill you definitely need to have a brake that holds.
brake.jpg
__________________
DWayne
1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck
10" moldboard plow
2016 XT1 42" deck 18HP
|