So I checked out the stop safety switch and it wasn't hooked up. My grandpa had bypassed it with a wife and taped it up. The wire was corroded and no good so I put a new one in it. I also spent $45 on a new key switch and threw it in there and still nothing. The voltage regulator was hanging because the rubber broke so I grounded off the rivets and riveted new rubber strips I cut from tire side walls onto it. I re-installed it and still nothing. I'm starting to think either grounds or possibly the starter solenoid? I know you said grounds were starter to frame and batter to frame. It I don't see the exact ones you're talking about
|