Check the throttle shaft and see if it has lateral movement. I could be pulling air thru there if it is worn. If it is, it's time to put in a shaft bushing. Also you can set the timing and it might also be time to do that. You will have to remove the starter/gen to see the timing hole in the flywheel shield. Also might be time to check and maybe replace the points and condenser especially if you plan on setting the timing.
Timing link:
http://www.onlycubcadets.net/forum/s...ead.php?t=4405
__________________
DWayne
1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck
10" moldboard plow
2016 XT1 42" deck 18HP
|