From a 1211 into a 1282 main harness wiring
Did some research this evening into how to wire up my 1211 that I am putting a k301aqs into. I bought a 1282 ignition switch installed it and got my battery and test light out and started checking things over. Heres what I came up with,I was using my 1200 as a guide .looks like it may be easier than I thought! (crossing my fingers)
1st on the left,orange wire has no pwr
yellow wire key on pwr ,crank it goes dead
bottom right two white wires key on pwr,cranking has pwr
second pic on the right
top wire is black or blue key on pwr crank pwr goes to coil
bottom wire key on pwr,crank goes dead.
Do I just wire into the 1211 harnnes using blade connectors and hook it up like my 1200? And forget about the orange wire?Looks like it would work just fine. Was funny had an engine block on the seat to get it to crank mode and brake locked down!
__________________
Brian
April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
|