This is the FIRST lawn mower:
" If you like a nice neat lawn, but you'd just as soon do without a small herd of sheep, you can thank Mr. Edwin Beard Budding. Back in 1830, Mr. Budding, an engineer from Stroud, Gloucestershire, England invented the first lawnmower. He obtained the idea after seeing a machine in a local cloth mill which used a cutting cylinder (or bladed reel) mounted on a bench to trim cloth to make a smooth finish after weaving. Budding realized that a similar concept would enable the cutting of grass if the mechanism could be mounted in a wheeled frame to make the blades rotate close to the lawn's surface. He went into partnership with a local engineer, John Ferrabee, and together they made mowers in a factory at Stroud. Examples of the early Budding type mowers can be seen in Stroud Museum, the London Science Museum and at Milton Keynes Museum in England.
These early machines were all made of cast iron and featured a large rear roller with a cutting cylinder (reel) in the front. Cast iron gear wheels transmitted power from the rear roller to the cutting cylinder. Overall, these machines were remarkably similar to modern mowers.
Budding and Ferrabee were shrewd enough to allow other companies to build copies of their mower under license, the most successful of these being Ransomes of Ipswich which began making mowers as early as 1832. The company has made mowers virtually continuously ever since, and is now the world's largest manufacturer of lawn care equipment.
That's why today, there are no sheep in your garage and why you can walk on the grass in your bare feet."
__________________
Original, 109, a pair of 122s, 124 with power lift, 124 with creeper, 126, 147, 1050, 1200, two 1250s, 1450 Dual Stick , another 1450, two 1650s, Gannon Earthcavator, Haban sickle bar and a bunch of other things you either pull, push or hang underneath.
|