[drivadesl]

I'm having a tough time removing the lever from the splined shaft to which it is attached. I have it so it moves maybe an eighth inch up and down on the splines, but then stops like it is hitting something. I removed the set screw before starting, and at first had no movement whatsoever. Hit it with WD40 and tried prying but theres no real easy way I can see to force it off. Must be a burr or something in the way. I'm not sure if its possible, but I'm going to try removing the shaft from the dash tower and then see if I can get the lever off from the bench. Anyone have any other tips or suggestions?? Thanks in advance.