I don't have one off a tractor to measure and don't have an electronic version of the 3-point installing instructions (couldn't find it in the technical library either).
So, let me try to explain.. the attaching plate has two threaded holes for two 7/16 X 7/8" cap screws. You install the plate to the lift bar with a pin. Then attach the plate with lock washers and plain washers and cap screws through the slot in the lift handle in the threaded holes in the plate. The bottom cap screw must contact the bottom of the slot in the lift handle.
I have to unbolt the lift assembly from the frame to get it all together, putting the pin in can be a real pain with the space you have to work.
Good luck,
__________________
David
|