Quote:
Originally Posted by Yosemite Sam
The 3 point will bolt right up to your 129 from the 1250, there is the possibility that your 1250 will not have part number 1 from your illustration but will have parts number 8 instead. If that is the case you will need to acquire a part number 1 (easy to make).
.
|
It was finally warm enough to pull the parts off the 1250. You are correct they all fit and the 1250 had the frankenbolts so I will need a shaft. I did notice the bushing in the frame, that the shaft would ride in, is not welded in heavily. It doesn't look like it would be that hard to get out. The hole in the frame is the right size for the frenken bolts - if the bushing comes out. I might give that a shot, the frame is sitting on blocks right now and going to be painted anyway
__________________
Gophred
2 - 1811's with 50C decks, one mows the other is waiting on deck, 129 (my sons retromod)-, hydro lift, custom 3 pt with a trailer ball , foot pedal speed control, used for trailer hauling. 129 (mower) 42" deck, foot control, 1810 with 44C - next in the slow death march of mowing the camp. a few 1200 series parts rigs. 2017 Kubota b2650 loader mid mower.
|