Quote:
Originally Posted by jimbob200521
Must be a blue moon soon because you are mistaken  You helped set the timing on my 1450, not this 129. This tractor came to me in excellent running order and all I've ever done to it, outside of oil change, tranny change, etc, is clean the carb when I first got it, even though it didn't look to have needed it. And I do have spark, I took the plug out and grounded it to the engine and cranked; I've got spark. I was wondering about the coil on it as well, is there a way to test that? |
AHHHHHH.......
I was thinking it was the 129.
Should be a nice pretty blue spark. If it is, I wouldn't get too carried away with the testing. Yes, you can ohm the coil. IIRC, Roland put up the specs in the tech section. Pull the point cover and see if the points are sparking a lot. If so, put a new condenser on it.