Quote:
Originally Posted by Bob95065
I posted an update on my 1450 project here: http://www.onlycubcadets.net/forum/s...t=29556&page=4
Any help with this tractor is appreciated. This is my first hydro and I want to put it back together right. Here's a couple of questions:
1. Is sector shaft side-to-side play acceptable?
2. Can I remove the sector shaft and put it back in without disassembling the pump? Will the swash plate fall if I remove it?
3. Is play between the cam plate and trunion plate acceptable?
Thanks in advance,
Bob |
Bob, I have never torn a hydro apart but knowing more about them interests me and your questions, I hope, will lead us all to more knowledge about them from the gurus here. But to help me understand, could you explain what you are referring to in questions 1 and 2 as the "sector shaft"? I am including an exploded view of the hydro, and I don't see anything referred to as a sector shaft. It looks to me like two pins (part 30) go through the holes in the swash plate (part 31) and the shafts (parts 39 and 54). Are 39 and 54 what you mean as sector shaft. If I'm seeing it right, you would have have the case split to get those pins (30) out to get the shafts (39 & 54) out. But I see from the pics in your original restoration thread that you had the trunion shaft out. So I'm confused about question 2. Thanks, Geo