Quote:
Originally Posted by gophred
I have a problem with my 1250 (44A deck) and my 129 (50A deck). The decks are only 3 maybe 4 inches up in the highest position and both would lower the deck a lot lower than the casters let it. The 129 is hydro lift and the 1250 is manual. I have another 129 with the 38" deck and it lifts a lot higher. Will the A type decks ever get very high on those tractors? The 129 with the 50A has A LOT of wear that probably hurts it's height. I currently have this one torn down to the frame, the shaft that holds the rear of the mule drive is worn about 1/8" and the mule drive itself is also quite worn where it rides on the shaft. I plan to fill these areas back in. I have reworked the hangers (filled the slots) and that got me a little, but not enough. Both of these mowers are used in some rough areas and it would be nice to get the deck(s) higher
Thanks
|
Me to? I'd like to get an extra inch on the deck myself?????
I hope some-one comes out with a plausible plan.
NIK,