I have pump adapters that will fit your pump along with the adapter for the engine. The issue that may be problem is that the CV shaft will need to be shortened for a 782D. In order to do this a section in the center will need to be removed, then it will need to be welded back together, the weld will then need to be turned down to the 3/4" diameter of the shaft and a sleeve installed over it with the sleeve welded to the shaft to make sure it stays straight. The 1863 shaft just happens to be the correct length to fit a 1772 or 1572.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|