Quote:
Originally Posted by Mr.Goffena
This is a hard thing to answer as it depends on what tractor you have and what one will be the donor. I cut off 15 inches from the old frame and added 21 inches from a 1250. The frame lengths are a little different. By that I mean the distance from the rear transmission bolt to the end of the frame rail. If you look at the frame on your 782 you will notice another hole at the bottom rear that is not used this hole is the front mounting hole for a transmission on a super. The distance between this hole and the current front transmission hole it 5.75 inches. In short you need to add 5.75 inches to the center of the tractor. I chose to add extra frame so I would only have to make one weld.
I just did some looking and found another thread on another site http://www.ihcubcadet.com/forum/mess...tml?1357219967 has some good info as well |
thanks a great deal dont wanna hijack the thread. im sure everyone else would love more pics tho
__________________
982D kwik-way loader w/3 spool control and front and rear remotes,2182, 1812 cat 0, 1440 puller, 3185 grass killer, 2x 450s, QA42, 364, tiller
|