[bignastyGS]

I had a very productive Cub weekend. We started with Dustin's 149. We removed the front spindle bolts and thoroughly cleaned and greased the assemblies. We also checked the trans oil,and got the mower deck installed. We moved to my MIL's 1450 and did the same front suspension work as well as replaced the hydro fan,the air cleaner gasket and did the deck blades after we had them sharpened.Then,I moved on to my 1200.Removed the wheel weights and started priming/painting them to look nice. Did the spindle removal/grease deal as well as greased the front axle and the steering box. Installed my mower deck blades and checked the air in the tires on all 3 tractors.Still have to do the same to Dustin's 108 as well as install a clutch assembly in it. Getting them ready for the plow days in Danville and hoping to hook my 1200 to the pulling sled.It helped that we did most of the maintenance last fall,as now they are ready for mowing duty now...My last endeavor was to get the (free) power washer running. I got it running after 5 pulls. Need to get some corrosion out of the water pump,but it's a Sears unit,so parts should be available...