I couldn't mark the holes for the motor mounts with the engine sitting on them so I took some black spray paint and used it to mark where the mounts were. I then removed the engine mounts and the frame rails set the mounts on them and marked the holes. Shown are the mounts bolted down. The engine moves around a little more than I would like but I have an idea on how to fix that. I mocked up the position of the radiator, battery and air cleaner. I will be getting more steel tomorrow to start building the mounts for them. The radiator has to be mounted high like it is so that the hose does not go down to it and overflow when opened.
|