Whaat, ...is the spool stuck in the valve? If Ya got everything back together and it won't move, that's about the only thing it could be.
Make sure the exposed part of the spool is clean, not rusty or anything. Soak it down with some WD-40 or like product and tap lightly while working the lever back and forth.Will the spool turn in the valve body with the link removed?
You do have just a single valve and not a dual set-up, correct?
Ya gotta tighten down the squeeze clamp really tight to keep the handle from spinning.
Best to use a grade 5 bolt to keep from busting it and your knuckles. You may have to widen the gap some if it has been stretched too far and is completely closed w/the bolt tight.
If Ya need a bushing and snap ring, I have some
|