xtrememotorworks.com has the lift bar and the lower 2 point, http://xtrememotorworks.com/Parts%20...rts%20List.htm
myself or someone else here will have the upper rock shaft and frankenstein bolts, and it sounds like you will have the lower part covered with the plate. You will also need a mule drive dedicated to the tiller and change out the gearbox pulley with one that will use a 5/8" belt. I do believe that is what the PTO pulley on the 1811 requires.
Here is a pic of my former 782 with the parts needed.
__________________
DWayne
1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck
10" moldboard plow
2016 XT1 42" deck 18HP
|