Quote:
Originally Posted by dvogtvpe
some yes, some no. you have to check how thick the castings are. I had 1 old 10 that I took to .090 over 14 bore (3.5). it was thicker than all the 14 blocks that I checked.
If you do decide to make it a 12 you would need a crank, rod and a oil pan also. strokes are different. if you just want to put a 12 piston on a 10 rod the wristpins are different size so you have to deal with that to. can be done just takes time and money.
|
The need for a different oil pan on a 12hp vs. 10 hp? Is that because the 12hp all had a deep sump oil pan? My 10's all have the flat pan. Is this a consistent thing? All K241s came with the flat pan? All K301s and above had the deep sump oil pan?