John
Looking at how the 1450 is wired it is very similar to the 1210 I used to own. I could not get it started in the winter for the life of me. What I did was to run a ground cable from the battery to the engine, I attached it at the starter and a larger cable from the battery to the solenoid and from the solenoid to the starter. I used welding cable. I also pulled the starter and cleaned up the commutater and the brushes. No more problems after that. Hope this helps.
Mac
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|