[Sam Mac]

OK, you’re not getting this. First lower the implement lift so that the hydraulic cylinder is in the retracted position. Next grab ahold of the rock shaft ( #1) and rotate it counter clockwise as far as it will go if you are standing on the right hand side of the tractor (see red arrow). Next put a pin in the hole where #4 goes. In float the pin simply pushes against the face of #1, they are not locked together (see blue arrow on#1 and dot on #4) Number 3 is supposed to float on #2. Number 2 is pinned to #1 (see green arrows). The lift links that connect the mower deck will need to be disconnected in order to do this.