Quote:
Originally Posted by dan
Murphycc, thanks for the harness! It looks pretty straight forward but I have a couple ? The wiring diagram I got from R Bedell shows letters at the terminals but none of my parts have these letters on them so i'm sure how to check it. I'm not sure about the wiring by the fuses, I have two red or orange wires and a doubled up white and a single white and then two yellow that I think are the hr clock. By the motor there is a three prong plug,I only have one wire off the ign module so i'm not sure about this. Would anyone have a diagram that shows the harness as it really is and what parts they go to?
I hope I'm making sense, please bear with me.
|
You need to look at a mag diagram, preferably one of a 1210, and look at the ignition switch, now look at the plug as though it were connected to the switch. You should be able to trace out the wires that way. The two switches I sent you should be good and I think both are mag switches. The only thing I can think of that you may need to trace back are the alt/charge wire and the mag kill wire of which the plug may be different than that of your Vanguard.
Scott