Quote:
Originally Posted by Sam Mac
Nick
If your pump has the 3 drain holes in it then line the gasket up with the holes so the oil will return to the case. Newer pumps don't have the 3 drain holes on those I put the gasket on so that the holes in it are at the top an I also fill the holes with a little silicone JUST THE HOLES. Torque calls for 30FT LBS. I usually stick the gasket to the tranny case but I don't think it matters. Keep everything nice and clean.
|
Thanks Sam, mine has 1 drain hole and 2 bolts , at least that's what it looks like, so how should it go with this kind of pump?