YES, those baffles can be custom fabricated. I have to agree, $~$82.00 is a lot for some formed steel bands.
Measure the distance between the Deck Lid and the Bottom Edge and that is the width. Allow about 1/2" from the outer tip of the blade and that is the circumference. I believe the baffles were held in place by small "L" brackets welded to the baffle then bolted to the deck lid.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|