Here's the bad news. A digital caliper is not precise enough of a measuring tool to check that bore. Just the fact that the bearing came out, is good indication that the press fit of the bore is not right. You can buy a new bearing, but if it just slides in, you will need to line bore the block. Which, will require complete disassembly, and a shop that is willing to do it. Just telling you so your prepared. You may have a junk block, or one that is too costly to fix.
Oh, and according to the pics in the parts book, the pic you posted is of the incorrect end. The bearing goes on the other end. The end with the drive gears.
|