Quote:
Originally Posted by hdsdcouple
Exactly why I was able to buy my red puller, the previous owner sick and tired of everyone wanting this taken apart and checked and this checked. He pulled just to have fun and it became not fun. Need to have a just for fun class.
|
That is why I want to run the garden stock class. I figure with a fresh engine and clutch, it will do pretty good. Here are the local rules. Based on this, what do I need to do to be competitive.
GARDEN STOCK
1. Stock garden tractors with no body alterations. DISCRETION OF
OFFICIALS.
2. 3600 RPM LIMIT
3. 1050 pound weight limit, 14 HP and under single cylinder (can run
OHV).
4. 23X10.50X12 Bar tires or turf tires (no professional pulling tires)
5. Stock carburetor with choke butterfly, no velocity stack allowed. Air
cleaner required. No intake standoffs allowed
6. Maximum .030" over bore. stock stroke.
7. Stock engine manufactured camshafts. (10 hp part in a 10 hp engine,
etc.)
8. Stock crank and rod (no pop up).
9. Stock head, no welding. Composite head gasket.
10. Stock type clutch and spring.
11. Stock transmission.
12. Stock pulleys on belt drive.
13. Pump gas and no electric fuel pump.
14. Stock coil. (no Bosch Blue coil)
15. Front weight bars are not allowed.
16. Must have wheelie bars if stock hitch is altered
17. Clutches and/or belts must be covered.