Quote:
Originally Posted by bolivier
Looks to me like the front of the deck is lower than the back. Is that an optical illusion? If this was the case, lifting the front deck hangers could give you the clearance you need. Maybe move the front deck wheels down a hole, or move the back wheels up a hole. Just looks like the front is almost on the ground where the rear is not.
|
The deck was actually tilted so the back was higher.....the front wheels are in the lowest holes and I moved the rears to the second hole up from the bottom. It brought the rear down so it was closer to level.......ideally you want the front to be nosed up a little correct? I matched the set-up of the 50C deck I recently bought for future use, and that's when I changed the height of the front hangers too......mine were all the way down.....I changed them to all the way up to match that new deck.