[Tacosteelersman]

Ok so I installed new NGK glow plugs, although I used the old glow plug wiring for now. I made and cleaned the grounds including the block to frame cable.


I turned the engine over and no start. The fuel lines have been bled at the filter, at the high pressure pump, and at the injector I am getting no more air and fuel is present.
The exhaust smokes like a dark grey, not quite black.
I did notice something I thought was unusual. When my electric fuel pump comes on the small fuel line going from one injector to the other pushes fuel out. I pulled that small line off of the back of the injection pump and it is pumping out of the injection pump without the engine turning over. Is this normal?