View Single Post
  #5  
Old 09-23-2014, 11:09 AM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,887
Default

Quote:
Originally Posted by mmzullo View Post
http://www.partstree.com/parts/?lc=c...&dn=0118500010

Here is an exploded view of the clutch. There is a needle bearing on the shaft that runs under the clutch disc that is probably frozen. If that is siezed or tight it will make the clutch disc spin. It's a long time since I had 1 apart but the picture said it's a bushing but I thought it was a bearing. Be careful with the friction material dont get too much oil on it. You'll have to take it apart to free or replace it. I think #8
Down load the service manual, go to page 16 it shows how the clutch goes together, here's the link.
http://www.onlycubcadets.net/forum/s...ead.php?t=4645

The clutch disk has a bushing in it not a bearing, it's part #8 in the parts tree pic.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote