Today turned out to be one of those some people should not be allowed to use tools days. Removed the axle tubes and got the normal quart of nasty goop. Then I noticed that on one of the bearings for the carrier the shims were loose and the bolts were cross threaded. Seriously some star assembled it like that, you have got to be kidding me.
Take it all apart, clean up the burrs they created from just cramming it together. Re-tap the bolt holes play with the shims till I got it nice. Funny thing is I almost didn't pull the tubes on this one, I was just going to suction the crud out of the tubes but I decided to drill the oil return holes in the case. guess I got lucky.
