Quote:
Originally Posted by Nonyab
maybe I should simplify my question. when the pto is "removed from the engine"
or "installed on the engine" AND I set the airgap the pto pulley will not turn freely and barely with force. Also the engine is not installed "in the tractor". All I want to know is "is this correct (normal)"?
For Mac, as stated, I have all those diagrams but they do not answer my question.
Non
|
When the PTO is on or off the engine, when set properly, it should NOT turn freely.
Quote:
Originally Posted by J-Mech
Just for clarity: When you adjust the air gap on an electric PTO you are also adjusting the brake. So to answer your question, no, when it is adjusted correctly it should be hard or impossible to turn by hand with the engine and PTO off. It should not turn when it is off and the engine is on, and the brake should not drag when the PTO is running (engine on).  |