Just a suggestion, my 1200 started to mow lower and lower, I thought the linkage was worn, which it was, especially the round crossmember the step bracket is on that acts as a pivot point....but I eventualy found the culprit.. It had cracked the pin that holds the lift arm to the rockshaft and it was very slowly rotating on the shaft, allowing the deck to drop.
I replaced it and now I can lift the deck high enough to clear some of the random rocks in the yard...
__________________
Quietlines and narrow frames, mostly projects but I mow with a 1200 and have a 122 set up for pulls. Wandering the country bringing towers to wind farms everywhere, and bringing yellow stuff home to Texas. Also into flatfender jeeps.
|