First off
Second, all you have to do is give a bearing company the numbers on the old ones or give them dimensions and they can cross the bearings for you. Even with this info you still may need to cross them. Finding bearings and seals is pretty easy, you just have to call a bearing company.
Here you go:
IH-124348-r91( Ujoints need 2):
These seldom fail, I can get you a number but don't have it handy. I'd run them unless they are bad.
475-698-R91( bearings need 2):
455-102-R91(collar need 2 if don't come with above bearing):
462-360-R1(flange for above bearing):
You can get these at a farm store. Just a 1" flange bearing with a lock collar.
387-835-R92(needle bearing need 1):
BA1210 This is a cage bearing, not full compliment but will work. Don't have a number for the full compliment at this time.
IH-76897-C1( sprocket need 1):
You will have to make one of these, or have one made.
Gear Box:
475-628-R92 (non sealed bearing need 2):
R12
TC-788025 or 485-306-R1( oil seal need 2):
SKF 7628
475-627-R91( bearing sealed need 2):
Nice 1630DC
JeffinPA makes all the shafts for the gear boxes and the the jackshaft for the drive. I would also suggest using him for the sprocked. Here is a link to his ad for the parts.
http://www.onlycubcadets.net/forum/s...ad.php?t=20875