First off not to sound like a azz , but do you have any mechanical experience? If not I would advise you not to mess with it. If you do on the lower left side of engine is the cam cover remove the four bolts and take the cover off. You will see the cam. Their are two small springs that are hooked over weights on the cam. Unhook them from the weights, only unhook them where the arrow is pointing. Then you can do a somewhat accurate compression test. Here is a pic the white arrow is pointing to the cam spring I was talking about. After your done don't forget to put the spring back on.
__________________
Brian
April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
|