Definitely factory. I would like to find a metal one and adapt it. I need to call a vendor and get the 2k series fan.
btw - Addition to the list for hyd plumbing. On this valve body the ports are a #5 size. Stock was #4. The center came with a straight fitting. To clear the cub tank needs a 90 deg which requires a swivel to clear the outside ports. Local did not have so i managed with a 90 deg #5-1/8 NTP then adapter to JIC flare. Will add pictures. I also only ran 1/4 tubing as several places are only 1/4 anyway. 3/8 is not needed for flow to the cylinders.
|