[toyman]

I decided to start working on the 70. I dug out all the pieces, pressure washed and degreased. Since this one is pretty much in original condition, except for the engine, I decided that I want it to look aged. I'm cleaning it all up, treating any rust, and getting it back in good working order. I got the front axle off and disassembled. It's almost ready to get greased and reinstalled. Got the repaired shifter back together and installed in the rearend along with the rear cover off the 982, so it's ready to be filled. Once I get the front axle back together I'll install it and the rear end and have a roller. I need to do some repairs on a front wheel and also get new bearings. I also need 4 new tires. I got a set of narrow rears and am going to put a set of 6-12 ags along with narrow ribs up front. I had to get the 1862 and 982 out of the shop to get to the 70, so I set them up for a pic as well.