Quote:
Originally Posted by J-Mech
Even at 95 PSI it should work. More than likely the charge relief valves (the big ones that you are holding in the pics) are stuck. Could be a charge pump issue, but more likely the valves.
Did you try moving the lever with the gauge installed? If so, what did it read then?
|
The pressure would drop to about 70 psi or so with the lever engaged and would be 'jumping'
I'm starting to think this is a charge relief valve problem... Are the ball bearings in the valve supposed to be freed up? They were rock solid. How can I diagnose a bad valve problem?