Quote:
|
I've read about some folks tightening them a little at a time until the least amount of vibration.
|
Tightening a little at a time is what worked very well for me after I installed new ISO-mounts and made the engine cradle modification. This plan has served me well on my 1250 Nightmare, and I continue to adjust; although almost always return them to approximately where they were.
Thus, don't be afraid to play with the tightness of the ISO-mount bolts. Ny-Lock nuts are recommended. Trial and error is a good rule for these, and they may need to wear in a little bit before you get them set where you want them. The main thing is not to have them too loose.
All the best to you and your 1200. It is a great tractor!