OK...the next step is to install a actual gauge and see what the pressure actual is.
(A) Remove pressure switch
(B) Install 1/8" NPT fitting (ie: see example)
(C) Hook up Pressure Gauge.
(D) Start engine.
(E) Observe & record PSI readings at idle and WOT
Report back.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|