ok im guessing that the later model 2082 had the large dia. pulley as it calls for a 451 blower and my early model calls for a 450 blower but now has the larger pulley.i mounted up the deck and i had to move the hanger from the front hole to the rear hole on the mule drive to make the rear piece fit onto the brake shaft a B90 belt would fit if it was still in the front hole on the mule. they are 2 inches forward which would make me think the belt should be 4 inches longer? partstree calls out either a 5/8 x 92 or 5/8 x 96.5 any ideas?
__________________
982D kwik-way loader w/3 spool control and front and rear remotes,2182, 1812 cat 0, 1440 puller, 3185 grass killer, 2x 450s, QA42, 364, tiller
|