[Group_44]

Well, until I get the details worked out to connect the valve so it looks "like it came from the factory" I sacrificed some used lift lines. I cut and flared the ends (jic 37 deg) and will run hoses I had made up to the front outlets. The jic to npt adapters pictured will be replaced with jic to jic fittings to attach to the hoses. I like the idea of reaming the valve outlets to fit the 3/8"push connector but the o-ring seat would have to be also enlarged since it is set up for the 5/16" o-ring on the original fitting. I appreciate all the great ideas being suggested here, my goal is to have a trouble free system I would be proud say I did and doesn't look like it was cobbled together just to get by.