Sounds like you have I good idea what you want. I just took a few measurements on my 1772 with the the rims like Sam had made, it's right at 42". I don't think i would go less, the front is about 42 anyways and you would have to keep an implement or spring on the lift arms to keep them from hitting the tires. Welding the centers isn't too bad, run a straight edge across the rim and measure to the four corners of the center, once you get them all the same tack them and double check the measurements. Oh, be sure the three point rockshaft isn't hitting the fuel tank in the full down position, I had some small issues with that.
__________________
149 with kwik-way loader,1772,two 1782 super smokers, 982 SGT w 54" haban blade,60" haban deck, 50in deck cat 0 3 point, brinly cat 0: blade, plow(3), disc.123,hydro lift. 61"O" Brinly single row planter,brinly cultivator,#2 trailer,brinly 10 inch plow,3 42 inch blades,Model #1 Tiller with extenstions,haban sickle mo. 106w/ags and hydro lift.
|