So picked up a circuit tester and and a digital multimeter
With key on and the circuit tester on the + coil to grd, light is on
With key on and start, the circuit tester on the + coil to grd, light is on
With key on and the circuit tester on the - coil to grd, light is off
With key on and start, the circuit tester on the - coil to grd, light is off
using the multimeter set to 200 ohms, and key on, it reads -172 from + coil to grd
using the multimeter set to 20k ohms, and key on, it reads 8.5 from plug wire hole to grd.
Not sure if any of this makes sense. Does this confirm it might be the coil? thanks for any and all suggestions.
|