I pulled the 3-point off my 782D to fix what I thought was broken, and it turns out there was nothing broken at all...just some play in the rockshaft. I put the bagger blades on the 46" deck, greased the spindles, and cleaned and greased the wheels on the deck. I washed and waxed it while it was nice and sunny, and it's much shinier now. I made the little bracket we've been discussing in another thread that is supposed to increase the lift height of the mower deck. I haven't tried it yet, as I'm removing slop from the front axle and installing new Heim joints in place of all of the worn tie rod ends. I also put the thrust bearing in the steering gearbox, and I've discovered that something is binding in the gearbox, so I guess that's coming out tomorrow
I need to finish my IH tiller/Cat-0 adapter for this soon so I can cross one more project off the list.