Quote:
Originally Posted by jimbob200521
Is there any alternative to the copper that's better than the plastic but not as "rigid" as the copper? I've got an oil pressure gauge I need to get around to installing one of these days but I'm not sure how I'd want to route the tubing  |
It all depend on what the connection on the back of the gauge is, some, like the one in this kit will only accept the 1/8" nut and ferrule, most of the braided lines have NPT or AN ends. If your gauge has an NPT thread on the back then by all means go for the braided line.
__________________
2082 w/60" Haban Deck & 450 Blower,AGs,weights
2084 w/54" Deck & 451 Blower
2086 w/54" Deck, 54" Haban Snow Blade
1864 w/54" Deck and weights
1641 w/48" Deck
1650 w/44" Deck parts Tractor (getting smaller all the time)
445 John Deere w/ model 40 FEL (went over to the dark side)
|