Quote:
Originally Posted by darkminion_17
drill it out and use an easy out BTDT
Hint....drill a tiny hole first till you hit the top of the rod,then drill the bigger hole.Then fill that with PB blaster and let it soak.
|
Just wanted to add that an easy out worked for me on my 1250. Maybe I got lucky. I was able to unscrew the broken button recessed in the handle with no other work needed. If it hadn't come out this way I would have cut the end off the rod and pushed the whole thing out the top. Then would replace the rod as well as the button.
This is one heck of a design. I have the factory service manual for the tractor but there is no mention of the lift handle. I was able to figure it out from an exploded diagram on a parts site and searching posts on CC forums.