Quote:
Originally Posted by sawdustdad
With a ring gear starter engine in a 108 with a QL muffler and air cleaner, a swap of the front grill assy and the hood and latch, you could make it work. check oil pan to be sure it will clear the frame. Need to look and see if the holes in the steering console sides are there for the thumb screws that hold the side panels on.
I don't think the air baffle at the back of the engine compartment is necessary.
|
The air baffle let's it draw cool air from the back of the tractor rather than recirculating heated air in the engine compartment. I'll admit I've never run one without the baffle, so I can't say if it makes a big difference or not, but the idea seems reasonable.
__________________
149 with kwik-way loader,1772,two 1782 super smokers, 982 SGT w 54" haban blade,60" haban deck, 50in deck cat 0 3 point, brinly cat 0: blade, plow(3), disc.123,hydro lift. 61"O" Brinly single row planter,brinly cultivator,#2 trailer,brinly 10 inch plow,3 42 inch blades,Model #1 Tiller with extenstions,haban sickle mo. 106w/ags and hydro lift.
|