You are not far enough back or high enough. There is a welded bar across the frame that goes just under the footrests. You should see the wear/contact marks where it was previously. Those hangers are primarily for your deck lift attachments etc. I had to install mine today using a bungee cord to hold up those back (forks), and the block up the front with 2x4's and rolled the tractor into it to engage the front catches, I also had that wedged open with a block of wood.
Hope this helps.
__________________
Joe
1200 Puller[/U][/B]
1864
2072 with 54 Inch Haban Blade
|