Here's what I use priming prototype and custom stuff at my work nason 2part epoxy primer. Good stuff!
As for painting it's not rocket science. We use full acrylic or urethane. I've done it so much I don't even measure them anymore like your (supposed) do. I've even tinkered around and mixed acrylic with the epoxy hardner, with good results! Just follow the directions, use a compatible primer and prep the surface first! Your paint job is only as good as the surface preparation! Get it clean, rust and oil free an smooth. No rough scratches.
__________________
Brian
April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
|